First post of the new year, again a short one. Back when I worked on the replacement bed, I had figured on cutting the old 'cap rails' off the top of the bed and welding them on. Had this been a warehouse find that had sat since 1961, that would have been ok, however the current bed is pretty beat up and rusty, so I opted to redo the rails as well for a fresh look.
I left enough steel in the cap rail to allow me to bend it around a die to achieve the rolled rail, and made the bed from 2 pieces that meet in the middle. I designed it in 14 Gauge for strength, but the factory stock 16 Gauge would be doable if 14 is too expensive. I nixed the custom bed supports underneath to save some pennies, and can use pre-fabbed steel for this, or just bend my own supports in the garage.
Lastly, I added the maple strips and gave the model a nice blue for looks.
|Note, the cap rails are not rolled down in the model. The finished product will look like a reproduction bed|
At the moment, I have loads of other higher priority things on the go (wedding soon, new house, etc), but I still sent the parts in for quote... who knows?